NO MORE DROPPED SCREWS The Excalibur Screw Holder avoids the problem of dropped and crooked screws. It is a simple and effective tool that holds the screw on the screwdriver or power tool bit for screwing into any material. This leaves other the hand free to position or guide the screw as required. The Fluorescent pink colour of the Excalibur Screw Holder is easily seen in the toolbox or if dropped in the grass! The Excalibur Screw Holder is supplied complete with a premium quality 90mm Phillips #2 driver bit, ready for immediate use. The Excalibur Screw Holder can be used with any 6.5mm/1/4" diameter screwdriver or 90mm long driver bit.   EASY TO FOLLOW INSTRUCTIONS 1. Slide Excalibur Screw Holder onto screwdriver or power tool bit (Min 90mm long). 2. Place any screw from 12 to 75mm long into cone. 3. Engage screwdriver or bit and work with just one hand with no risk of dropping the screw. 4. Work until “click” sound is heard, which indicates that the screw is flush with the material.